Wheel Blast
Typically Wheel Blasting is the process used to remove scale and impurities for finishing a product or to prepare a product for coating. This process is achieved by abrasive materials centrifugally thrown through a wheel onto the surface of the product. The abrasive can be as gentle as sawdust to as abrasive as steel angular grit. Another use of Wheel Blast is for strengthening or peening.
Wheelabrator - Parts list
| P/N | DESCRIPTION |
|---|---|
| 000001 | SEAL & FASTENER KIT (M & RLM LINERS) |
| 000007 | 3/4" SQ X 18 HUB SEAL-M & RLM WHL |
| 000008 | 3/4" SQ X 22 HUB SEAL - R WHL |
| 104111 | BLADES, 8/SET |
| 105509 | RUBBER CONVEYOR BELT, Drain Hole 0.38" dia, 20 x 27 |
| 106510 | Elevator Bolt Assemblies |
| 108664 | OIL SIGHT GAGES |
| 109651 | RUBBER CONVEYOR BELT, Drain Hole 0.38" dia, 27 x 36 |
| 110437 | Retainer Clip, each |
| 112958 | Retainer Clip, each |
| 118636 | KEY |
| 12x12Linerspec | Liner, 12 x 12 with insert (also 728821) |
| 121607 | BARREL HEAD HUB 27 x 36 |
| 130073 | LOWER END LINER - 27 X 36 |
| 134805 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 135280 | HANGING HOOK LINER 14 X 22 X 1 |
| 137633 | RUBBER CONVEYOR BELT, Drain Hole 0.31" dia, 27 x 36 |
| 138981 | HANGING HOOK LINER - 14 X 14 X 1 |
| 142615 | RUBBER CONVEYOR BELT, Drain Hole 0.38" dia, 15 x 20 |
| 142793 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 143669 | CAGE RETAINER |
| 144655 | CASTBARREL HEAD LINER 27 x 36 |
| 144669 | IMPELLER - Q WHEEL |
| 145586 | HANGING HOOK LINER 14 X 26 1/2 X 1 |
| 145587 | HANGING HOOK LINER 14 X 28 X 1 |
| 145588 | HANGING HOOK LINER 14 X 18 X 1 |
| 145589 | HANGING HOOK LINER 14 X 25 X 1 |
| 145792 | FEED SPOUT - M WHL - 90 DEG |
| 146110 | Barrel Head Screw, Flat Head Cap |
| 148084 | HANGING HOOK LINER 14 X 14 X 3/8 |
| 148610 | CABINET LINER, 2 x 12 Shiplap |
| 148963 | BLADE G WHEEL 8/set |
| 150078 | RUBBER CONVEYOR BELT, Drain Hole 0.19" dia, 27 x 36 |
| 150574 | CORNER LINER 4 X 6 X 23 1/2 |
| 150574 NH | CORNER LINER 4 X 6 X 23 1/2 (NO HOLE) |
| 150576 | HANGING HOOK LINER 10 X 14 X 3/8 |
| 151426 | Mill Drive Shaft 28 super I |
| 151434 | LINK - LH 22, 28 & 34 SUPER I (use 294215) |
| 151435 | LINK - RH 22, 28 & 34 SUPER I (use 294216) |
| 151966 | Bearing Cap Seal |
| 151970 | SEAL, BEARING, RUBBER |
| 151971 | Felt Seal |
| 152341 | Barrel Head Bearing Cap |
| 152346 | Liner, Barrelhead, Center 36x42, 48x42, 48x48, 48x72, 7/14/22/28/34 Super 1 |
| 153169 | LINK PIN (USE 294246) |
| 153175 | "M" CONTROL CAGE ADAPTER |
| 153177 | WHEEL HSG ASSEMBLY - M |
| 153191 | Hub Seal Assy (includes 458620, 458621, 000007) **we sell these parts Individually** |
| 153260 | BLADES - M WHL - 19 1/2" (SPRING LOCK) |
| 153854 | REPLACEMENT SHAFT - "M"-28 1/8" L |
| 153877 | IMPELLER (use 408000 IMPELLER) |
| 153878 | CENTERING PLATE - M WHL |
| 153892 | CONTROL CAGE - M WHEEL - 100 DEG-VEE-CW |
| 153918 | CLAMPING LUG - M WHL |
| 153939 | WHEEL BEARING ASSEMBLY - "M" - OIL OR GREASE |
| 153943 | SPRING LOCK - M & Q WHL sold by the each |
| 153946 | HUB ASSEMBLY - "M" & "RLM" W/TAPER LOCK |
| 153958 | Taper Lock Bushing 2525 2.500" (USE 2525212) |
| 154439 | Spacer Collar |
| 154440 | Spacer Collar |
| 154864 | CAP NUT 5/8-11 1-1/8” hex x 1-1/2” Long |
| 155078 | Rubber Conveyor Belt, Drain Hole 0.19" dia, 27x36 |
| 155909 | BARREL HEAD BEARING CAP |
| 157005 | RUBBER CONVEYOR BELT, Drain Hole 0.31" dia, 20 x 27 |
| 158009 | LINK - RH 7 & 14 SUPER I (also 681318) |
| 158010 | LINK - LH 7 & 14 SUPER I (also 681319) |
| 158032 | Bucket, Elevator |
| 158063 | IMPELLER BOLT M, RLM & BD WHEEL |
| 158082 | WHEEL HOUSING COVER SEAL 22 x 6.5 - M & RLM |
| 159161 | RUBBER CONVEYOR BELT, Drain Hole 0.44" dia, 27 x 36 |
| 159320 | CONTROL CAGE - M WHEEL - 100 DEG-VEE-CCW |
| 159395 | LINER |
| 159638 | LINK PIN - 7 & 14 SUPER I |
| 159710 | Spherical Roller Bearing |
| 159813A | Barrel Head, Outer Segments, 14 Super I |
| 159887 | Felt Seal |
| 159888 | Rubber Seal |
| 160009 | CENTER PLATE R WHL |
| 160019 | CONTROL CAGE ADAPTER R WHL |
| 160037 | SEAL, FELT |
| 160039 | BLADES - R WHL - 21" (SPRING LOCK) |
| 160247 | WHEEL BEARING ASSEMBLY - "R" - OIL OR GREASE |
| 160248 | HUB ASSEMBLY - "R" WHL WITH TAPER LOCK |
| 160314 | CONTROL CAGE - M WHEEL - 82 DEG-VEE-CW |
| 160412 | BLADES - Q WHL - 15" (SPRING LOCK) |
| 160556 | Retainer Ring, each |
| 161877 | KEY - SHEAVE END |
| 161878 | LOCK CAP FOR SHEAVE |
| 161879 | BEARING SPACER GREASE |
| 161880 | BEARING SEAL SPACER |
| 161881 | INNER SEAL |
| 161882 | END CAP |
| 161883 | BEARING HOUSE |
| 161884 | PILLOW BLOCKS |
| 161887 | REPLACEMENT SHAFT - "R" 26 13/16" L |
| 164527 | REPLACEMENT SHAFT - "M" - 28 7/8" L |
| 164604 | BEARING END CAP - M WHEEL |
| 164677 | HUB ASSEMBLY-"M"&"RLM" WITH T.L.-SPECIAL LNGTH |
| 164774 | SEAL, FELT |
| 164881 | WHL BRNG ASSY -"M"-OIL OR GREASE - EXTRA LONG |
| 165620 | Stud / Full, |
| 165790 | IMPELLER LOCKWASHER - M & RLM WHL |
| 165895 | SPRING LOCK - R WHEEL |
| 16849 | Bucket, Elevator |
| 169565 | BARREL HEAD SHAFT 22 SUPER |
| 169614 | BARREL HEAD HUB 22 SUPER |
| 169654 | BARREL HEAD UNIT BEARING ASSEMBLY |
| 171159 | BARREL HEAD SHAFT |
| 171410 | RUBBER CONVEYOR BELT, Drain Hole 0.19" dia, 20 x 27 |
| 171427 | Oil Seal |
| 17202 | Bucket, Elevator |
| 173314 | Felt Seal |
| 173435 | BARREL HEAD BOLTS |
| 173945 | RUBBER CONVEYOR BELT, Drain Hole 0.63" dia, 27 x 36 |
| 173967 | SEAL RING R WHEEL |
| 173987 | DRIBBLE VALVE ASSEMBLY, B-292 |
| 17401 | Elev Bolt, Washers, and Nuts for bucket assembly |
| 175174 | BARREL HEAD ASSEMBLY |
| 176068 | barrel head bolt flat head cap screw .5-13 X 2 HDN STL |
| 178990 | SPROCKET 24 1/8 DIA |
| 181629 | Lock Washer |
| 193525 | SPROCKET, Conveyor Drive - 7 & 14 SUPER |
| 193526 | TRACTION WHEEL - 7 & 14 SUPER, 14 SUPER II |
| 196680 | CONTROL CAGE - M WHEEL - 49 DEG-SQ-CW&CCW |
| 196680MOD | CONTROL CAGE - M WHEEL - 49 DEG-SQ-CW&CCW |
| 197317 | WEAR RESISTANT WASHER 2" OD x 11/16 ID x 1/4" |
| 197615 | SPROCKET, Conveyor - 22, 28 & 34 SUPER |
| 197616 | TRACTION WHEEL - 22, 28, & 34 SUPER I & II |
| 198457 | 198457 HARDENED NUT 1/2"-13 79950 |
| 198600 | IMPELLER LOCKWASHER - 1/2" - Q WHL |
| 199179 | Elevator Head Pulley Shaft |
| 2 X 12 | CABINET LINER |
| 203208 | "R" WHL ASSEMBLY CW - 21" X 5" |
| 203244 | "R" WHL ASSEMBLY CCW - 21" X 5" |
| 20357 | HARDENED CAP NUT (USE 79950) |
| 204592 | Door Seal 6" |
| 204593 | DOOR SEAL, 9" |
| 204594 | Door Seal, 12" |
| 208200 | WHEEL BEARING ASSEMBLY - "M" - OIL OR GREASE |
| 208846 | ROLL PIN 14 SUPER II - 1/4 X 2 (S590046-16 ROLL PIN) |
| 209592 | HANGING HOOK LINER 14 X 22 X 1/2 |
| 211910 | PILLOW BLOCK ASSEMBLY - M-WHEEL (also 94832) |
| 211911 | BEARING HOUSING - M WHEEL - SHORT (incl. 211914 Ret.) |
| 211912 | REPLACEMENT SHAFT - "M" - 19"L |
| 211913 | BEARING SPACER SHORT |
| 211914 | GREASE SEAL RETAINER |
| 213887 | LINER, 3 x 12 Shiplap on 3 sides |
| 213888 | LINER, 3 X 12 Shiplap on 4 sides |
| 215581 | CABINET LINER, 2 x 12 Shiplap |
| 217011 | RUBBER CONVEYOR BELT, Drain Hole 0.50" dia, 15 x 20 |
| 219340 | Tetra Seal |
| 220040 | 1/2"-13 CAST NUT - FLANGED |
| 220041 | 3/8"-16 SQUARE CAST NUT |
| 220042 | 1/2" SQUARE CAST NUT |
| 220043 | 1/2" CAST NUT - HEX |
| 222063 | RUBBER CONVEYOR BELT, Drain Hole 0.50" dia, 20 x 27 |
| 223306 | CABINET LINER, 12 X 12, WITH HOLE |
| 223306-M | CABINET LINER, 12.5 X 12.5, WITH HOLE |
| 225000 | 5/8" CAST NUT - HEX |
| 225602 | 20X6 CR Steel Split Pulley |
| 225682 | Split Boot Pulley |
| 226000 | CAST NUT - 1" Hex Acorn |
| 230223 | Taper Lock Bushing |
| 233793 | "M" WHL ASSEMBLY CW - 19 1/2" X 2 1/2" |
| 233794 | "M" WHL ASSEMBLY CCW - 19 1/2" X 2 1/2" |
| 233875 | "M" WHL ASSEMBLY CW - 19 1/2" X 1 5/8" |
| 233876 | "M" WHL ASSEMBLY CCW - 19 1/2" X 1 5/8" |
| 234096/7 | CABINET LINER 6 3/8 X 12 |
| 234345 | HANGING HOOK LINER 14 X 22 X 1/2 (SPEC. CUT) |
| 234346 | HANGING HOOK LINER 14 X 22 X 1/2 (SPEC. CUT) |
| 235907 | CONT. CAGE ADAPTER SUPPORT - M WHL |
| 235911 | WHEEL HSG ASSEMBLY - M & RLM |
| 238774 | HANGING HOOK LINER 18 X 22 X 1/2 |
| 238775 | HANGING HOOK LINER 18 X 18 X 1/2 |
| 238776 | HANGING HOOK LINER - 18 X 14 X 1/2 |
| 241143 | Elevator Belt Bucket Assembly 14 Super I |
| 241961 | CONTROL CAGE, 100 deg. See PN 686419 |
| 247019 | Sprocket, Roller Chain - Idler McMaster Carr |
| 24817 | Impeller Use 144669 |
| 249715 | CABINET LINER 12 x 12 WITHOUT HOLE |
| 250135 | IMPELLER BOLT R WHEEL (3/4 - 10 X 3") |
| 257280/1 | CABINET LINER 4 x 12 |
| 263177 | "M" WHL ASSEMBLY CW - 15" X 2 1/2" |
| 263178 | "M" WHL ASSEMBLY CCW - 15" X 2 1/2" |
| 263179 | "Q" WHL ASSEMBLY CW - 15" x 2 1/2" |
| 263203 | "Q" WHL ASSEMBLY CW - 15" x 2 1/2" |
| 263204 | "Q" WHL ASSEMBLY CW - 19 1/2" x 2 1/2" |
| 263205 | "Q" WHL ASSEMBLY CCW 19 1/2" x 2 1/2" |
| 268163 | Elevator Belt Ass'y- Complete w/ buckets, splice and hardware |
| 275914 | HUB SEAL RETAINER - L.H. (USE 458620) |
| 275915 | HUB SEAL RETAINER - R.H. (USE 458621) |
| 281842 | WHEEL HSG COVER - M & RLM |
| 291252 | PLOW BOLT #3 Head, 3/4 x 3 1/4 - GRADE 8 (also 680991, M-1702) |
| 291252MN | PLOW BOLT 3/4 x 3 1/4" MN 22,28 &34 CU FT |
| B-292 | Bronco Dribble Valve Assy (also 173987) |
| 293388 | LH Link, 50 cu. Ft., 76 cu. Ft. |
| 293389 | RH Link, 50 cu. Ft., 76 cu. Ft. |
| 294215 | LINK - L.H. 22,28 & 34 SUPER I (ALSO 151434 or 681325) |
| 294216 | LINK - RH 22, 28 & 34 SUPER I (ALSO 151435 or 681324 |
| 294246 | LINK PIN 22, 28 & 34 SUPER I |
| 298685 | LOWER SIDE LINER - M WHL |
| 298686 | LOWER SIDE LINER - M WHL |
| 298687 | UPPER SIDE LINER - M WHL |
| 298688 | CURVED TOP LINER - M & RLM WHL |
| 298689 | END LINER - 20 1/4 - M & RLM WHL |
| 298919 | LINK PIN, 50 cu. Ft., 76 cu. Ft. W/A |
| 3/8 x 2-3/4" | Cotter Pins, 50 cu. Ft., 76 cu. Ft. |
| 30877 | 15x4 Liner Viking |
| 30880 | curved liner Viking |
| 36307 | CENTERING PLATE - G & Q WHL |
| 4 X 12 | CABINET LINER also 257280/1 |
| 404268 | SPROCKET |
| 404644 | END LINER SET SCREW M & RLM |
| 404645 | WHEEL HOUSING BUSHING - M & RLM |
| 404646 | END LINER SET SCREW JAM NUT - M & RLM |
| 407151 | END LINER - 21 M &RLM WHL |
| 408000 | IMPELLER - M WHEEL ( ALSO 153877) |
| 40810 | CAP NUT |
| 408115A | LINER/UPPER SIDE / 50R & 50BDR |
| 408116A | LINER/LOWER SIDE / 50R & 50BDR |
| 408117A | LINER/LOWER SIDE / 50R & 50BDR |
| 408118A | TOP LINER CURVED |
| 408119A | End Liner 50R210 50BD150 50BD210 |
| 408545 | Head Pulley Shaft |
| 414370 | IMPELLER - RLM WHEEL |
| 414371 | CONTROL CAGE - RLM WHEEL - 70 DEG-SQ-CW&CCW |
| 414396 | FEED SPOUT - RLM WHL - 90 DEG (20349) |
| 414665 | "RLM" WHL ASSEMBLY CCW - 15" X 2 1/2" |
| 414667 | "RLM" WHL ASSEMBLY CW - 15" X 2 1/2" |
| 414699 | CLAMPING LUG - RLM WHL |
| 417089 | CENTERING PLATE - RLM WHL (20350) |
| 41868 | HUB ASSEMBLY - "Q" STRAIGHT BORE |
| 418966 | LINK - RH - 14 SUPER II |
| 418967 | LINK - LH - 14 SUPER II |
| 420006 | LINK PIN - 14 SUPER II |
| 420142 | Barrelhead Outer |
| 420143 | Barrelhead Center |
| 420166 | SPROCKET, Drive - 14 SUPER II |
| 422712 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 423249 | FEED SPOUT - RLM WHL - STRAIGHT |
| 423430 | WHEEL HOUSING ASSEMBLY - RLM |
| 423611 | CONTROL CAGE -RLM WHEEL - 82 DEG-VEE-CCW |
| 423661 | CONTROL CAGE - RLM WHEEL - 82 DEG-VEE-CW |
| 424124 | SPROCKET, Conveyor - 22, 28 & 34 SUPER II |
| 424460 | Barrel Head Seal, Top Rear, RH |
| 424461 | Barrel Head Seal, Front Top, RH |
| 424462 | Front Narrow Barrel Head Seal RH |
| 424463 | CORNER SHIELD, RIGHT HAND |
| 424464 | Barrel Head Seal, Top Rear, LH new pn 484288 |
| 424465 | Barrel Head Seal, Front Top, LH |
| 424466 | Front Narrow Barrel Head Seal LH |
| 424467 | CORNER SHILED, LEFT HAND |
| 424562 | LINK RH 22, 28 & 34 SUPER II (also 681322) |
| 424563 | LINK LH 22, 28 & 34 SUPER II (also 681323) |
| 424968 | Barrel Head Seal, RLH |
| 424969 | Barrel Head Seal |
| 425282 | ROLL PIN 1/4 X 2 1/2 ( 22, 28, 34 SUPER II) |
| 425414 | LINK PIN 22, 28 & 34 SUPER II |
| 426856 | TOP LINER SEAL STRIP (2 PCS) M & RLM WHL RUBBER STRIP, 1/8 X 5/8 X 27" |
| 427073 | TUNE UP KIT - 25M195 WHL, 70 deg CC |
| 428571 | BLADES - RLM WHL 15" (8 per set) |
| 428843 | Taper Lock Bushing |
| 441001 | END LINER-21 3/4 -M & RLM WHL |
| 441985 | CONTROL CAGE - RLM WHEEL - 49 DEG SQ-CW&CCW |
| 442157 | TUNE UP KIT 25Q 195 WHL |
| 442470 | LOWER SIDE LINER - RLM WHL |
| 442471 | LOWER SIDE LINER - RLM WHL |
| 442472 | UPPER SIDE LINER - RLM WHL |
| 443372 | TUNE UP KIT - 25M195 WHL, 82 deg CC |
| 443373 | TUNE UP KIT - 25Q150 WHL |
| 443514 | TUNE UP KIT - 25RLM150 WHL |
| 443535 | Liner, Barrelhead, Outer |
| 443536 | Liner, Barrelhead, Outer |
| 444082 | TUNE UP KIT - 25RLM195 WHL |
| 444471 | CONTROL CAGE - RLM WHEEL - 100 DEG-VEE-CCW |
| 444472 | CONTROL CAGE - RLM WHEEL - 100 DEG-VEE-CW |
| 444903 | BLADES - RLM WHL - 19 1/2" |
| 448251 | SEAL RING - RLM WHL |
| 449506 | TUNE UP KIT - 25RLM195 WHL |
| 449507 | TUNE UP KIT - 25RLM195 WHL |
| 449596 | TUNE UP KIT - 25RLM195 WHL |
| 449612 | G" bare WHEEL - CW - 12" X 2 1/2" |
| 449641 | Conveyor Flight Mang Steel 3/8" drain holes w/o TB, 14 cu ft sup II |
| 449643 | Conveyor Flight Manganese Steel 3/8 drain holes (28 Super II) |
| 450852 | END LINER-22 1/2 -M & RLM WHL |
| 45101 | HUB G WHEEL |
| 451252 | Bolts, Solid Mg Flight Only, 1" x 5-1/2"LG SLL |
| 451579 | CONTROL CAGE ADAPTER - RLM WHEEL (ALSO 471857) |
| 452160 | CLAMPING LUG - RLM WHL - (DEEP) |
| 452484 | TUNE UP KIT - 25RLM195 WHL |
| 453658 | TUNE UP KIT - 25RLM150 WHL |
| 454807 | TUNE UP KIT - 50R210 70 deg |
| 45512 | ROLLER |
| 45513 | BUSHING |
| 45558 | SEAL RING - M WHL |
| 456660 | Conveyor Flight Manganese Steel w/o TB 14 cu ft TB |
| 456670 | PLOW BOLT - 5/8" x 2-3/4" Mang N - 7 &14 CU FT |
| 458620 | HUB SEAL RETAINER - M & RLM WHL L.H. |
| 458621 | HUB SEAL RETAINER - M & RLM WHL R.H. |
| 459353 | RUBBER CONVEYOR BELT, Drain Hole 0.63" dia, 20" x 27" |
| 459509 | TUNE UP KIT - 25RLM150 WHL |
| 459736 | Conveyor Flight Manganese Steel w/o TB 7 cu ft TB |
| 461043 | TUNE UP KIT - 25M195 WHL, 49 deg CC |
| 461481 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 461510 | TUNE UP KIT - 25RLM195 WHL |
| 466139 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 467312 | LINER, END - 25RLM150 |
| 467313 | LINER, CURVED TOP - 25RLM150 |
| 469673 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 470873 | PLOW BOLT - 1/2-13 x 2-1/2" MN - 27 x 36 |
| 47104 | Elevator Head Pulley 20x27 |
| 471181 | FEED SPOUT, CURVED, W/A 25BD250 / EZ Wheel 90 DEG |
| 471184 | BLADES - BD WHEEL - 19 1/2" |
| 471187 | CLAMPING LUG - BD WHEEL |
| 471197 | END LINER - 19 1/2" BD WHEEL |
| 471198 | CURVED TOP LINER - 19 1/2" BD WHEEL |
| 471199 | CONTROL CAGE ADAPTOR, W/A 25BD250 Wheel |
| 471200 | LINER, CONTROL CAGE ADAPTOR, W/A 25BD250 Wheel |
| 471539 | Elevator Belt Bucket Assembly, |
| 471857 | BD CONT. CAGE RETROFIT KIT TO RLM (ALSO 451579) |
| 47454 | RUBBER CONVEYOR BELT, Drain Hole 0.25" dia, 15 x 20 |
| 474540 | RUBBER CONVEYOR BELT, Drain Hole 0.25" dia, 15 x 20 |
| 474671 | TOP LINER (442472 W/ HOLES) |
| 484355 | LINER, END - M / RLM, 24" Long |
| 487697 | Taper Lock Bushing #2525 1.3750B |
| 48770 | CENTER PLATE Q WHL |
| 488166 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 488470 | COMPLETE LINER SET - M WHL |
| 488470 SPEC | COMPLETE LINER SET W/ 407151 REPLACEMENT LINER |
| 488471 | COMPLETE LINER SET - RLM WHL |
| 488471 SPEC | COMPLETE LINER SET W /407151 REPLACEMENT LINER |
| 490716 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 491944 | Tune Up Kit 25G120 70 Deg cc |
| 495224 | Roller Sleeve Wheelabrator |
| 495-A | Bronco Blade set/8 |
| 496346 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 497123 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 497652 | HUB ASSEMBLY - BD WHL (HI SPEED) |
| 498368 | PLOW BOLT - 5/8" X 2 1/2 - GRADE 8 (also 38286) |
| 498594 | TUNE UP KIT - 25 BD195 WHEEL |
| 498679 | RUBBER CONVEYOR BELT, Drain Hole 0.38" dia, TBR 12 |
| 499622 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 499738 | TUNE UP KIT - 25RLM150 WHL |
| 499739 | TUNE UP KIT - 25RLM150 WHL |
| 499740 | TUNE UP KIT - 25RLM150 WHL |
| 499789 | LINK - RH (NEW STYLE-one piece cast link) 27 X 36 |
| 499790 | LINK - LH (NEW STYLE-one piece cast link) 27 X 36 |
| 4x12 spec | CABINET LINER 4x12 with Insert |
| 500062 | Nut, 1/2 Hex |
| 500063 | Nuts, 5/8" |
| 500064 | Nut, 3/4 Hex |
| 500071 | Nut, Hardened (use 79950) |
| 500106 | Washer, Flat 1/2" |
| 500108 | Lock Washers, 3/4" |
| 500115 | Lock Washer, 3/8" |
| 500116 | Lock Washer, 1/2" |
| 500117 | Lock Washers, 5/8" (also R5434150000) |
| 500118 | Lock Washers, 3/4" |
| 500220 | Bolt, Hex head, 1/2"-13 x 1-1/4" long |
| 500221 | Cap Screw |
| 500223 | Cap Screw, Hex Head, 1/2- 13 x 1 1/4" |
| 500247 | Cap Screws, 5/8 x 1-3/4" NC 1020 Hex Head |
| 500251 | Screw, Hex Head Cap |
| 500270 | Cap Screws, 3/4" x 2-1/4" Hex Head |
| 500272 | Screw, Hex Head Cap |
| 500273 | RUBBER CONVEYOR BELT, Drain Hole 0.25" or 0.3125" |
| 500311 | Cap Screws, 1" x 4" LG Bolts Hex Head |
| 500470 | Socket Head Cap Screw |
| 500473 | IMPELLER BOLT Q WHEEL 1/2-13 x 1 3/4" Long |
| 500474 | Impeller Bolt - 1/2-13 x 2" Long |
| 500601 | COTTER PIN 3/16 x 1" |
| 500604 | COTTER PIN 1/4 X 2 " 22, 28 & 34 SUPER |
| 500630 | Nuts, 5/8" USE 500063 |
| 500632 | Bolt, Hex head, 1/2"-13 x 4" long |
| 500670 | Socket Set Screw |
| 500850 | COTTER PIN 1/4 X 1 1/2" 7 & 14 SUPER |
| 501168 | Screw, Hex Head Cap |
| 501849 | Screw, Hex Head, 1/2"=13 x 7/8" |
| 51553 | Oil Seals |
| 51796 | SPROCKET 13T ASA#80, 1.500" BORE, 3/8 X 3/16 KEYWAy |
| 52712 | RUBBER CONVEYOR BELT, Drain Hole 0.19" dia, 15 x 20 |
| A562SL-A | End liner, Long Shiplap (also A-562) |
| 563341-8 | Nut, Square 1/2-13 ( use 220042) |
| 57612 | FILTER CARTAGES C57612 12.75 x 36 x 8.375 |
Wheelabrator - Parts list continued
| P/N | DESCRIPTION |
|---|---|
| 6 X 12 | CABINET LINER |
| 6 x 12 no hole | cabinet liner w/no hole |
| 62025 | Head Pulley Super Series WA |
| 63522 | Elevator Head Pulley 27x36 |
| 63559 | Ball Bearing |
| 63599 | Ball Bearing w/ Inner Race |
| 661995 | Elevator Bucket Assembly, 34 cu ft Super II |
| 665597 | TUNE UP KIT |
| 665782 | TUNE UP KIT |
| 672075 | BLADES - BD WHEEL - 25" |
| 672545 | FELT SEAL 4-1/4W X 7-3/4LG X 5/8"THK W/3" DIA CIRCLE Cut Out |
| 673369 | TUNE UP KIT |
| 673389 | TUNE UP KIT - 25 BD195 WHEEL |
| 673393 | BARE WHEEL ASSEMBLY - BD WHEEL |
| 673880 | 8X6 Steel Split Pulley |
| 674037 | HUB SEAL RETAINER RH, W/A 25BD250 Wheel |
| 674038 | HUB SEAL RETAINER LH, W/A 25BD250 Wheel |
| 674219 | TUNE UP KIT - 25 BD250 WHEEL |
| 674220 | TUNE UP KIT - 25 BD250 WHEEL |
| 674265 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674268 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674269 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674307 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674308 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674309 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 674530 | RUBBER CONVEYOR BELT, specify Drain Hole and size |
| 675420 | IMPELLER - BD WHEEL |
| 675421 | CONTROL CAGE - BD WHEEL - 70 DEGREE |
| 675422 | CONTROL CAGE - BD WHEEL - 49 DEGREE |
| 675423 | CENTERING PLATE - BD WHEEL |
| 675768 | HUB ASSEMBLY "BD" WHL w/ 1-7/8" TAPERLOCK |
| 675769 | HUB ASSEMBLY "BD" WHL w/ 2-1/8" TAPERLOCK |
| 675770 | HUB ASSEMBLY "BD" WHL w/ 2-3/8" TAPERLOCK |
| 675810 | HUB ASSEMBLY "BD" WHL w/ 1 5/8" TAPERLOCK |
| 675811 | HUB ASSEMBLY "BD" WHL w/ 2 1/2" TAPERLOCK |
| 676119A | BD Wheel - L/H Side Liner |
| 676120A | BD Wheel - R/H Side Liner |
| 676121A | BD Wheel - Top Side Liner |
| 676185 | END LINER - 25" BD WHEEL |
| 676186 | CURVED TOP LINER - 25" BD WHEEL |
| 676660 | CONTROL CAGE - BD WHEEL - 100 DEGREE |
| 676710 | LINK PIN - 27 X 36 |
| 676660 | CONTROL CAGE - BD WHEEL - 100 DEGREE |
| 676710 | LINK PIN - 27 X 36 |
| 677385 | TUNE UP KIT - 25 BD250 WHEEL |
| 677636 | RUBBER CONVEYOR BELT, Drain Hole 0.44" dia, TBR 6 |
| 677653 | IMPELLER BOLT - BD WHEEL (also 682988) |
| 677861 | BLADE BD WHEEL 15" (LOW SPEED) |
| 677877 | TUNE UP KIT - 25BD150 WHL |
| 677878 | TUNE UP KIT 25BD150 |
| 677879 | TUNE UP KIT - 25BD150 WHL |
| 677881 | Finger Seals, Urethane, 4" wide, 18" length |
| 677896 | Finger Seals, Urethane, 4" wide, 19" length |
| 677898 | 15" BD TOP LINER |
| 677901 | 15" BD END LINER |
| 677947 | Finger Seals, Urethane, 4" wide, 22" length |
| 677948 | Finger Seals, Urethane, 4" wide, 24" length |
| 678051 | TUNE UP KIT |
| 678052 | TUNE UP KIT |
| 678237 | TUNE UP KIT |
| 678238 | TUNE UP KIT |
| 679099 | TUNE UP KIT |
| 679747 | Blade, 50BD210 (8 p/set) |
| 680148 | BELT ASSY/ELEVATOR |
| 680459 | Finger Seals, Urethane, 4" wide, 26" length |
| 680460 | Finger Seals, Urethane, 4" wide, 27" length |
| 680461 | Finger Seals, Urethane, 4" wide, 28" length |
| 680462 | Finger Seals, Urethane, 4" wide, 30" length |
| 680463 | Finger Seals, Urethane, 4" wide, 31" length |
| 680464 | Finger Seals, Urethane, 4" wide, 32" length |
| 680465 | Finger Seals, Urethane, 4" wide, 34" length |
| 680466 | Finger Seals, Urethane, 4" wide, 36" length |
| 680467 | Finger Seals, Urethane, 4" wide, 46" length |
| 680468 | Finger Seals, Urethane, 4" wide, 39" length |
| 680469 | Finger Seals, Urethane, 4" wide, 40" length |
| 680470 | Finger Seals, Urethane, 4" wide, 44" length |
| 680471 | Finger Seals, Urethane, 4" wide, 45" length |
| 680472 | Finger Seals, Urethane, 4" wide, 48" length |
| 680990 | Plow Bolt, 5/8"-11 X 3", #3 Grd 8 |
| 680991 | Plow Bolt, 3/4" x 3-1/4" Grd 8 |
| 681318 | LINK - RH 7 & 14 SUPER I (use 158009) |
| 681319 | LINK - LH 7 & 14 SUPER I (use 158010) |
| 681320 | LINK - RH SUPER II (ALSO 418966) |
| 681321 | LINK -LH 14 SUPER II (ALSO 418967) |
| 681322 | LINK - RH 22, 28 & 34 SUPER II (use 424562) |
| 681323 | LINK - LH 22, 28 & 34 SUPER II (use 424563) |
| 681324 | LINK - RH 22, 28 & 34 SUPER (use 294216) |
| 681325 | LINK - LH 22, 28 & 34 SUPER (use 294215) |
| 681418A | Impeller 50BD/50R |
| 681419A | Control Cage 70 Deg CW & CCW |
| 681696 | FILTER CARTAGES |
| 682231 | SEAL RING - BD WHEEL |
| 682750 | TUNE UP KIT |
| 682976 | TUNE UP KIT, 50BD210 |
| 682988 | IMPELLER BOLT EZ fit (USE 677653) |
| 683000 | BLADE BD WHEEL 13" |
| 683135 | Elevator Belt Bucket Assembly, 8 5/8" wide x 52' long, 8" x 5" Buckets on 10.00" vertical centers |
| 683432 | TUNE UP KIT 25 BDL 195 |
| 683466 | TUNE UP KIT 25BD 130 |
| 683467 | TUNE UP KIT 25 BD 130 |
| 683487 | LOCK WASHER - BD/EZ WHEEL |
| 683596 | TUNE UP KIT 25 BD150 |
| 684136 | CONTROL CAGE - BD WHL - 30 deg |
| 684138 | TUNE UP KIT - 25 BDL 195 |
| 684921 | TUNE UP KIT - 25 BDL 195 WHEEL |
| 684934 | TUNE UP KIT 25 BDL 150 |
| 685067 | TUNE UP KIT 25 BDL 150 |
| 685203 | TUNE UP KIT 50BD210, 100 DEGREE CCW |
| 685277 | Bare Wheel, BD |
| 685782 | BLADE - BD WHEEL - 15" (HI SPEED) |
| 686154 | Blade, 50BD, (8 p/set) |
| 686208 | TUNE UP KIT 25 BD 130 |
| 686216 | BARE WHEEL ASSEMBLY - BD WHEEL (HI SPEED) |
| 686216/675770 | Bare Wheel Assembly - BD wheel w/hub attached |
| 686310 | BD LONG END LINER 23" long |
| 686357 | TUNE UP KIT 25 BD 195 WHEEL (HI SPEED) |
| 686421 | TUNE UP KIT, 50BD250, 100 DEGREE |
| 686764 | TUNE UP KIT - 25 BD 150 WHEEL (HI SPEED) |
| 68691 | LINK/OFFSET |
| 686914 | TUNE UP KIT, 50BD250, 70 DEGREE CW & CCW |
| 686969 | TUNE UP KIT 25 BDL 150 |
| 688343 | TUNE UP KIT 15" BD WHEEL (HI SPEED) |
| 688459 | TUNE UP KIT 25 BD 150 |
| 689101 | FUNNEL, WORK GUIDE |
| 690340 | Mill Belt w/ 5/16th drain holes |
| 691597 | BLADE - BD WHEEL - 19 1/2" (HI SPEED) |
| 691823 | TUNE UP KIT - 25 BD 150 WHEEL (HI SPEED) |
| 691836 | TUNE UP KIT 25 bd 150 |
| 692251 | TUNE UP KIT 25 BDL 150 |
| 692991 | Link, LH (Use 424562) |
| 692992 | Link, RH (Use 424563) |
| 693393 | BARE WHEEL ASSEMBLY - BD WHEEL |
| 693467 | BD END LINER 18-1/2"LONG |
| 694503 | TUNE UP KIT BD 195 WHEEL |
| 694723 | TUNE UP KIT 25 BD 195 WHEEL (HI SPEED) |
| 695357 | TUNE UP KIT - 25M150 |
| 695619 | TUNE UP KIT 25 BDL 195 |
| 695838 | SPROCKET, Conveyor Drive - 7 & 14 SUPER use 193525 |
| 696116 | TRACTION WHEEL - 7 & 14 SUPER, 14 SUPER II (use 193526) |
| 696233 | HUB, BD WHEEL, ASSEMBLY VERTICAL MOUNT |
| 697538 | TUNE UP KIT 25BD 250 |
| 698417 | TUNE UP KIT 25BDL 150 |
| 698876 | Pusher Finger (made to order) (Also 82230PD/AS) |
| 699062 | TUNE UP KIT 25 BDL 195 |
| 6x12 spec | CABINET LINER w/ insert |
| 7001 | Wheel Spindle Kit - Long Oil |
| 7002 | Barrel Head, Trunnion Bearing Kit 22/28/34 Super I & II |
| 7003 | Barrel Head, Trunnion Bearing Kit 7 & 14 Super I & II |
| 7004 | Idler & Take Up Shaft Bearing Kit |
| 7004-1 | Mill Drive Shaft Bearing Kit with Oil seal |
| 7004114 | BOLT, IMPELLER |
| 7005 | Idler & Take Up ShaftBearing Kits |
| 7005-1 | Mill Drive Shaft Bearing Kit with Oil seal |
| 7006 | Bearing Kit |
| 721287 | Tune Up Kit 25 BDL 195 |
| 723881 | Taper Lock Bushing |
| 726007 | LINK RH 22, 28 & 34 SUPER II (also 424562) |
| 726008 | LINK LH 22, 28 & 34 SUPER II (also 424563) |
| 728221 | Liner, 12 x 12 with insert (USE 12X12LINERSPEC, also B-1212) |
| 728594 | Taper Lock Bushing |
| 72951 | Elevator Boot Pulley 20x27 |
| 729955 | Liner, End 35 140/ 160/ 180/ End liner |
| 729960 | Liner, Top 35 140/ 160/ 180 Top Liner |
| 729982A | IMPELLER |
| 730032A | CONTROL CAGE, 70deg |
| 730082A | BLADE SET, 8/set |
| 730103 | Blade Set, 35BD180, 8/set |
| 730289 | Tune Up Kit, 35BD160 49 deg cage |
| 730290 | Tune Up Kit, 35BD160, 70 deg Control Cage |
| 730291 | TUNE UP KIT - 35BD160 100 deg cage |
| 730981 | CONTROL CAGE 35 DEG RLM |
| 730984 | SEAL RING use S900658-2 |
| 731156 | Centering Plate |
| 731244A | CONTROL CAGE, 30 degree, CW, CCW |
| 731245A | CONTROL CAGE, CW, CCW, 49 degree (BCT#B12849) |
| 731246A | CONTROL CAGE, 100 degree, CW, CCW |
| 731262 | Blade Set, 35BD1140, 8/set |
| 731274 | TUNE UP KIT - 35BD160 |
| 731283 | TUNE UP KIT - 35BD140 30 deg cage (also 737517) 35EZ140 |
| 731284 | TUNE UP KIT - 35BD140 49 deg cage (also 737518) 35EZ140 |
| 731285 | TUNE UP KIT - 35BD140 70 deg (also 737519) 35EZ140 |
| 731286 | TUNE UP KIT - 35BD140 100 deg cage (also 737520) 35EZ140 |
| 731328 | TUNE UP KIT - 35BD180 35EZ180 p/n 737536 30 deg |
| 731329 | TUNE UP KIT - 35BD180 35EZ180 p/n 737537 49 deg |
| 731330 | TUNE UP KIT - 35BD180 35EZ180 p/n 737538 70 deg |
| 731331 | TUNE UP KIT - 35BD180 35EZ180 p/n 737539 100 deg |
| 732153 | Liner, End 35EZ Long |
| 732155A | Liner, Top - Long 35EZ |
| 733441 | TUNE UP KIT, 25BD 195Wheel |
| 733972 | BLADE SET, 8/set (use 6-750047 also 6-900011) |
| 733973 | BLADE SET, 8/set, (use 6-750048 also 6-900012) |
| 733974 | BLADE SET, 4/set, (use 6-750048) 4 per set |
| 733975 | BLADE SET, 4/set, (use 6-750047)4 per set |
| 733976 | BLADE SET, 4set, (use 6-750047) |
| 733977 | BLADE SET, 4/set, (use 6-750047) |
| 733978 | BLADE SET, 8/set CCW (use 6-920015) |
| 733979 | BLADE SET, 8/set CW (use 6-920032) |
| 735542 | BLADE SET, 8/set (use 685782) |
| 735961 | Impeller Bolt for M, RLM, BD wheels (USE 158063) |
| 736807 | SPOUT SEAL 25EZ fit (use S-900658-2) |
| 737521 | TUNE UP KIT - 35 EZ160 EZ Fit Wheel, 30 degree |
| 737522 | TUNE UP KIT - 35 EZ 160 EZ Fit Wheel, 49 deg |
| 737523 | TUNE UP KIT - 35 EZ160 EZ Fit Wheel, 70 degree 35EZ160 |
| 737524 | TUNE UP KIT - 35 EZ160 EZ Fit Wheel, 100 degree |
| 737559 | 35EZ bare wheel 10-30HP |
| 737560 | 35EZ bare wheel 40-50HP |
| 737645A | LINER/TOP - 25EZ E 130-140 |
| 737646A | LINER/END - 25EZ E 130-140 |
| 737648A | IMPELLER/25EZ 8 blade |
| 737661A | impeller/25EZ 12 blade |
| 737703 | SPOUT CLAMP - 25&35EZ wheels |
| 737717A | Control Cage 25EZ 30deg |
| 737718A | CONTROL CAGE/25EZ 49 DEG |
| 737719A | control cage 70 deg 25EZ |
| 737824A | LINER, END, 25 E 155 - 175 |
| 737825A | Liner, Top 25EZ 155-175 |
| 738872 | Bare Wheel/8 blade 25EZ 7.5-30HP |
| 738873 | Bare Wheel 8 blade 25EZ 40-50HP |
| 739164 | 25EZ155 8 blade 49 deg cage Tune up kit |
| 739165 | 25EZ155 8 blade 70 deg cage Tune up kit |
| 739168 | 25EZ175 8 blade 49 deg cage Tune up kit |
| 739169 | 25EZ175 8 blade 70 deg cage Tune up kit |
| 739290 | 25EZ130 8 blade 49 deg cage Tune up kit |
| 739291 | 25EZ130 8 blade 70 deg cage Tune up kit |
| 739523 | 25EZ140 12 blade 49 deg cage Tune up kit |
| 739524 | 25EZ140 12 blade 70 deg cage Tune up kit |
| 739527 | 25EZ155 12 blade 49 deg cage Tune up kit |
| 739528 | 25EZ155 12 blade 70 deg cage Tune up kit |
| 739531 | 25EZ175 12 blade 49 deg cage Tune up kit |
| 739532 | 25EZ175 12 blade 70 deg cage Tune up kit |
| 739535 | 25EZ140 8 blade 49 deg cage Tune up kit |
| 739536 | 25EZ140 8 blade 70 deg cage Tune up kit |
| 739665A | 25EZ200-270 Top Liner |
| 739666A | 25EZ200-270 End Liner |
| 740298 | 25EZ245 8 blade 70 deg cage Tune up kit |
| 740299 | 25EZ245 8 blade 49 deg cage Tune up kit |
| 740302 | 25EZ270 8 blade 49 deg cage Tune up kit |
| 740303 | 25EZ270 8 blade 70 deg cage Tune up kit |
| 740310 | 25EZ245 12 blade 49 deg cage Tune up kit |
| 740311 | 25EZ245 12 blade 70 deg cage Tune up kit |
| 740314 | 25EZ270 12 blade 49 deg cage Tune up kit |
| 740315 | 25EZ270 12 blade 70 deg cage Tune up kit |
| 74800 | Nut, Cap - Hardened (Use 226000) |
| 75312 | LINER BOLT ASSEMBLY |
| 75925 | Skew Roller, Conveyor |
| 76291 | HARDENED CAP NUT (FLAT TOP) 3/8-16 11/16" |
| 78010 | PULLEY, HEAD 9"X 25" |
| 78013 | PULLEY,BOOT 9"X 25" |
| 79950 | HARDENED CAP NUT (RD. TOP) 1/2"-13, 7/8" Hex, 1-1/4 Tall |
| 8 X 12 | CABINET LINER |
| 8 X 12 spec | CABINET LINER w/ insert (also B-812) |
| 803600882 | Filter cartridges |
| 833600882 | FILTER CARTridges |
| 84552 | Front Idler Rollers |
| 84553 | Take-up Shaft Rollers |
| 85703 | SPROCKET, Conveyor Drive |
| 861985 | TUNE UP KIT BD/RLM CONVERSION |
| 894723 | TUNE UP KIT |
| 92205 | Oil Seal |
| 93203 | Oil Seal Drive Side of drive shaft |
| 93293 | Belt Pulley Guides 27x36 Rubber Belt |
| 93295 | Belt Pulley Guides 27x36 Rubber Belt |
| 93426 | CONTROL CAGE - Q WHL-70 DEG-SQ- USE 200900 WE29 |
| 93794 | Bushing for 20x6 Pulley p/n 93293 |
| 93794 225682 | Boot Pulley |
| 94382 | Roller Bearing with inner race |
| 94383 | Oil Seal |
| 94403 | Blast Gate 4" |
| 94832 | PILLOW BLOCK ASSEMBLY - M-WHEEL |
| 94870 | Roller Bearing |
| 94873 | Ball Bearing |
| 94876 | BEARING END CAP - M WHEEL - SHORT |
| 94877 | Q SHAFT |
| 94878 | BEARING HOUSING - M WHEEL - LONG |
| 94880 | BEARING SPACER LONG |
| 94881 | SHEAVE LOCK CAP |
| 95037 | Oil Seal |
| 95868 | WHEEL BEARING ASSEMBLY - "Q" - OIL OR GREASE |
| 97963 | SPROCKET 48x42 (2.558 BORE) |
| 97964 | SPROCKET 48x42 (1.964 BORE) |
| 97965 | SPROCKET 48x42 (3.496 BORE) |
| 97974 | SPROCKET - 27 X 36 |
| 98277 | Flanged Bearing |
| 98502 | BARREL HEAD SLEEVE |
| 98812 | SHEAVE - STYLE B |
| 99292 | ELEVATOR HEAD PULLEY 27 X 36 |
| E3KIT16/49-A | E Wheel TUK 49DEG (M3 wheel) |
| E3KIT16/70-A | E Wheel TUK 70DEG (M3 Wheel) |
| M-2093 | Blade set/8 (M3 Wheel) 16" |
| B-12823 | End Liner, M2 Wheel |
| B-12824 | Top Liner, M2 Wheel |
| M731245 | Control Cage 49 deg Original M3 Wheel |
| MP13.5 | blade set 8 |
| M-600207 | Roller |
| X000041 | FELT SEAL 22 3/4" x 3/4" wide x 1/2" thick |
Pangborn - Parts list
| P/N | DESCRIPTION |
|---|---|
| 195747-4RI | TUNE UP KIT 195-4 RI CCW |
| 26-590038 | IDLER ROLLER - 15 & 20 GN(also 6-590038) |
| 26-750025 | CW OUTER RUNNERHEAD #3 & 4RK |
| 26-750055 | CW OUTER RUNNERHEAD |
| 26-750083 | CCW OUTER RUNNERHEAD #3 & 4RK |
| 26-750087 | CCW OUTER RUNNER HEAD |
| 26-750098 | OUTER RUNNERHEAD 130 2 RK |
| 26-750099 | OUTER RUNNERHEAD 130 2 RK |
| 26-750198 | CCW OUTER RUNNER HEAD |
| 26-750199 | CW OUTER RUNNERHEAD 12-1/2" DIA |
| 26-780194 | CCW OUTER RUNNERHEAD 195-3RG |
| 26-870020 | OUTER RUNNERHEAD |
| 26-870021 | OUTER RUNNERHEAD |
| 26-890052 | OUTER RUNNERHEAD |
| 3060153 | O RING Rim - Loc |
| 36-610431 | SPINDLE FLANGE (same as/use 6-610431) |
| 36-620465 | INNER RUNNER HEAD 180-3RK & 4RK |
| 36-630495 | SPROCKET |
| 36-890052 | OUTER RUNNERHEAD |
| 6-080052 | Liner Top Genesis |
| 6-080053 | Liner/End Short Genesis |
| 6-080054 | Liner/End Long Genesis |
| 6-580817 | VANE CW-2 RG - 140DD WHL |
| 6-590033 | LINK RH - 15 &20 GN |
| 6-590034 | LINK LH - 15 & 20 GN |
| 6-590038 | IDLER ROLLER 15, 20 GN (ALSO 26-590038) |
| 6-590039 | DRIVE SPROCKET, Conveyor - 15 & 20 GN |
| 6-590192 | VANE CW - 5RG |
| 6-591163 | VANE CCW - 2 RG - 140DD WHL |
| 6-592503 | Link Pins |
| 6-610278 | SHAFT (also M610278) |
| 6-610424 | REAR SLINGER |
| 6-610425 | GREASE RING STEEL |
| 6-610426 | GREASE RING BRASS |
| 6-610427 | GREASE RING |
| 6-610428 | SEAL RING |
| 6-610429 | BEARING CAP, REAR |
| 6-610430 | BEARING CAP, FRONT |
| 6-610431 | Spindle Flange |
| 6-610438 | RING, LABYRINTH |
| 6-610463 | BEARING ASSEMBLY HOUSING |
| 6-610569 | DEFLECTOR 210-5RI |
| 6-610643 | DEFLECTOR 195-4RI |
| 6-610648M | IMPELLER CW - 4RI & 4RK |
| 6-610649M | IMPELLER CASE CW - 4RI |
| 6-610669 | VANE CW 4 RI |
| 6-610679 | DEFLECTOR 195-3RI |
| 6-610684 | CW VANE 195 3RI |
| 6-610694 | IMPELLER 3 RI - CW 6-610742 |
| 6-610695 | IMPELLER CASE 3 RI - CW & CCW 6-610695 |
| 6-610742 | IMPELLER 3RI - CCW 6-610694 |
| 6-610744 | CCW VANE 195-3RI |
| 6-610745 | IMPELLER CASE 3 RI - CCW use 6-610695 |
| 6-610746M | IMPELLER CCW - 4RI & 4RK use 6-610648M |
| 6-610747 | VANE CCW 4 RI |
| 6-610749 | IMPELLER CASE CCW - 4RI |
| 6-610663 | LOWER END LINER |
| 6-612736 | BEARING ASSEMBLY W/O HUB p612736 |
| 6-620412 | Liner, 12 x 12 Shiplap w/ hole (use 223306) |
| 6-620463 | CW OUTER RUNNERHEAD 195-4RI |
| 6-620464 | CW OUTER RUNNERHEAD 195-3RI |
| 6-620465 | INNER RUNNER HEAD 180/195-4RI |
| 6-620467 | INNER RUNNER HEAD 195-3RI |
| 6-620472 | CW OUTER RUNNERHEAD 195-5RI |
| 6-620473 | INNER RUNNER HEAD 195-4RI |
| 6-620474 | TOP LINER |
| 6-620504 | CCW OUTER RUNNERHEAD 195-4RI |
| 6-620505 | CCW OUTER RUNNERHEAD 195-5RI |
| 6-620509 | CCW OUTER RUNNERHEAD 195-3RI |
| 6-620516 | UPPER END LINER (BP-2611) |
| 6-620930 | IMPELLER CASE CW - 4RI |
| 6-620934 | SPOUT CLAMP (H-971210) |
| 6-640921 | Vane Set, CW |
| 6-640922 | Vane Set, CCW |
| 6-650664 | Liner |
| 6-660230 | BEARING LOCKWASHER 3 GO |
| 6-660245 | FEED SPOUT |
| 6-660049-1 | 12 x 15 Cabinet Liner w/2 sides shiplap |
| 6-680621 | Liner, Lower End |
| 6-690376 | 1/2" FLANGED CAST NUT (also 6-920006 - USE 220040) |
| 6-700003 | LINER PLATE, 10 x 15 ship lap |
| 6-700010 | LINER, 4 X 15 SHIP LAP |
| 6-700097 | Plow Bolt, 3/4"-10 x 3-1/4", #3 head |
| 6-700097/1 | Lock Washer, 3/4" |
| 6-700097/2 | Nut 3/4", grd # 2 |
| 6-700104 | LOWER END LINER (W/EARS) |
| 6-700216C | LOWER END LINER |
| 6-730575 | 3 GO BARREL R & L LINK |
| 6-730602 | BEARING HOUSING 2 RK 1 |
| 6-730603 | REAR BEARING CAP 2 RK - 1 |
| 6-730604 | FRONT BEARING CAP 2 RK-1 |
| 6-730605 | SEAL RING 2 RK - 1 |
| 6-730606 | GREASE RING 2 RK - 1 |
| 6-730607 | GREASE RING 2 RK-1 |
| 6-730614 | SPINDLE FLANGE 2 RK - 1 |
| 6-730620B | IMPELLER CASE universal CW CCW |
| 6-730637B | IMPELLER CASE - CCW - 140DD USE 6-730620M |
| 6-750026 | IMPELLER CASE CW - 4RK USE 6-750029M |
| 6-750027 | DEFLECTOR 3RK - 4 RK |
| 6-750029 | IMPELLER CASE CCW - 4RK |
| 6-750047 | VANE CW - 4RK |
| 6-750048 | VANE CCW - 4RK |
| 6-750052 | VANE CW - 3RK (USE 6-900013) |
| 6-750053 | VANE CCW - 3RK (USE 6-900014) |
| 6-750056 | IMPELLER CW - 3RK |
| 6-750057 | IMPELLER CCW - 3RK (USE 6-750056) |
| 6-750063 | IMPELLER CASE - CCW - 3RK (also 6-900012) |
| 6-750064 | IMPELLER CASE CW - 3 RK (USE 6-750063M) |
| 6-750100S | VANE CW - 2RK - 130DD WHL (USE PN 6-920032) |
| 6-750101S | VANE CCW - 2 RK - 130DD WHL (USE PN 6-920015) |
| 6-750102-F | INNER RUNNERHEAD 130-RK |
| 6-750103 | DEFLECTOR |
| 6-750104B | IMPELLER CW&CCW-130DD/140DD |
| 6-750200 | IMPELLER CASE - CW - 130DD use 6-750200M |
| 6-750200M | IMPELLER CASE - CW AND CCW - 130DD |
| 6-750201 | IMPELLER CASE CCW - 130DD Use 6-750200M |
| 6-800076 | TOP END LINER |
| 6-800077 | BOTTOM END LINER |
| 6-800078 | TOP LINER |
| 6-800097 | MIDDLE SIDE LINER FRONT |
| 6-800194 | Liner, Top, USE Astech's p/n 6-800078 |
| 6-820041 | LINER, BOTTOM END |
| 6-820042 | LINER, TOP END |
| 6-850049/50 | VANE CW (USE 6-750047) |
| 6-850065 | IMPELLER CASE |
| 6-870007 | TOP LINER 130 DD-2RK |
| 6-870008C | LOWER END LINER |
| 6-870015 | UPPER END LINER 130 DD |
| 6-870029 | MIDDLE SIDE LINER REAR |
| 6-900011 | VANE CW (Use 6-750047) |
| 6-900012 | VANE CCW ( use 6-750048) |
| 6-900013 | VANE CW - 3RK (also 6-750052) |
| 6-900014 | VANE CCW - 3RK (also 6-750053) |
| 6-920006 | 1/2" FLANGED CAST NUT (USE 220040) |
| 6-920015 | VANE CCW also 6-750101 |
| 6-920032 | VANE CW also 6-750100 |
| 6-940001 | Vane 12/set 240/265 DD 2RI (also M940039) |
| 6-960001 | Liner, Top |
| 69617 | Elevator Bucket Assembly, 12 GNR, 1/4" drain holes |
| 6-970012 | DEFLECTOR |
| 6-970036A | UPPER END LINER |
| 701684-1 | PLOW BOLT ADAPTER, 1 1/2 X 1 3/4, 3/4" HOLE,23 GN |
| 701684-2 | PLOW BOLT ADAPTER, 1 3/4 X 1 3/4, 3/4" HOLE, 26GN, 32 GN |
| 701684-3 | PLOW BOLT ADAPTER, 1 1/2 X 1 3/4, 5/8" HOLE, 23 GN |
| 701684-4 | PLOW BOLT ADAPTER, 1 3/4 X 1 3/4, 5/8" HOLE, 26GN, 32 GN |
| 84552 | IDLER ROLLER - 32 & 34 GN |
| 84553 | TAKE-UP ROLLER - 32 & 34 GN |
| 85703 | DRIVE SPROCKET - 32 & 34 GN |
| DV 391444 | SQUARE LOCK PIN |
| I-580320 | Cast Iron Elevator Bucket, 8X5 |
| L-580004 | LINK RH (14583) - 26, 32, & 34 GN |
| L-580005 | LINK LH (14582) - 26, 32, & 34 GN |
| M-600206 | Conveyor Drive Sprockets |
| M-600207 | ROLLER - TRACTION WHEEL |
| M-610278 | SHAFT ( USE 6-610278) |
| M-701210 | SPINDLE, SHAFT 2 RK-1 |
| M-770549 | Mill Belt, 12 GNR, specify drain hole size- (Endless) |
| M-770549-1 | Mill Belt, 12 GN Straight (not endless) spliced |
| M-940730-3 | Mill Belt, Tumbler Belt 3GN Rubber 1/4" drain holes |
| P-580002 | LINK PIN - 26, 32, & 34 GN |
| P-580003 | LINK PIN (6-580003) |
| P-600985 | SPROCKET |
| P-612736 | PANGBORN BEARING W/O SPINDLE FLANGE |
| P-621766 | TAPER LOCK BUSHING (3020 2 7/16) |
| P-640921 | TUNE UP KIT |
| P-640922 | TUNE UP KIT |
| P-870060 | IMPELLER DRIVER |
| P-870247 L/S | TUNE UP KIT 4 RK CW |
| P-870248 L/S | TUNE UP KIT 4RK CCW |
| P-870249 L/S | TUNE UP KIT 3 RK CW |
| P-870250 L/S | TUNE UP KIT 3 RK CCW |
| P-870251 | TUNE UP KIT |
| P-870252 | TUNE UP KIT |
| P-870253 | TUNE UP KIT 3RI CW |
| P-870254 | TUNE UP KIT 3RI CCW |
| P-870255 | TUNE UP KIT 195-4 RI CW |
| P-880069 | FILTER CARTRIDGE, PANGBORN |
| P-880116 | Bushing |
| P-960947 | IMPELLER DRIVER |
| R-543170000 | 5/8" x 1-1/4" IMPELLER BOLT |
| R-543415000 | 5/8" LOCK WASHER (USE 500117) |
| R-54316800 | Impeller Bolt |
| S-870253 | Tune Up Kit 130DD2RK CCW (Short Kit) |
| S-870254 | Tune Up Kit 130DD2RK CW (Short Kit) |
| RA-P4 | VANE SPRING (244) |
| S-471367-6 | taperlock bushing 2517 2 1/8 |
| S-563341 | Nut, Square 1/2-13 (220042 or 5000860) |
| S-590047-3 | Roll Pin |
| S-592503 | LINK PIN 15 & 20 GN (6-592503) |
| S-610488 | ROUND LOCK PIN |
| S-612251 | BEARING, ROLLER |
| S-612256 | SEAL RING (Use to S-900658-2 flat o-ring) |
| S-612274 | SEAL, O-RING |
| S-634053 | Boot Pulley with 1-7/16 Bushing |
| S-634054 | Head Pulley with 2-716 Bushing |
| S-640921 | TUNE UP KIT CW, 3 RI |
| S-640922 | TUNE UP KIT CCW, 3 RI |
| S-701458 | VANE SPRING150 4RK |
| S-710031 | Felt Seal - 4.625" X 3.750"ID X 5/8" |
| S-720703 | VANE LOCK PIN (ROUND) |
| S-721105 | SEAL RING, (USE Astech p/n S-900658-2) |
| S-801192 | Plow Bolt 1/2"-13 x2-1/2" #3 head |
| S-870247 L/S | TUNE UP KIT 4 RK CW |
| S-870248 L/S | TUNE UP KIT 4 RK CCW |
| S-870249 L/S | TUNE UP KIT 3RK CW |
| S-870250 L/S | TUNE UP KIT 3RK CCW |
| S-870253 | TUNE UP KIT 3 RI |
| S-870254 | TUNE UP KIT 3 RI |
| S-870255 | TUNE UP KIT 4 RI CW |
| S-870256 | TUNE UP KIT 4 RI CCW |
| S-880407 | LINK PIN |
| S-900658-1 | seal ring (o-ring) |
| S-900658-2 | SEAL RING (replaces S-612256) |
| V-631073 | HARDENED ACORN NUT, 1/2-13, 15/16" Tall, 7/8 Hex |
| V-631074 | HARDENED ACORN NUT, 3/8-16, 3/4" Tall, 3/4 Hex |
BCP - Parts list
| P/N | DESCRIPTION |
|---|---|
| 1176 | TUNE UP KIT |
| 102028 | CONTROL CAGE - 37 DEGREE USE 52127 |
| 102029 | Control Cage Adaptor USE PN C102CCA |
| 102127 | CONTROL CAGE - 49 DEGREE (USE 52128) |
| 102130 | Control Cage Adaptor USE PN C102CCA |
| 102647 | TUNE UP KIT - 19.50" WHEEL |
| 102648 | TUNE UP KIT - 19.50" WHEEL |
| 102649 | TUNE UP KIT - 19.50" WHEEL |
| 103452 | WHEEL BARE 12 BLADED TAPER |
| 104897 | 15" DOUBLE TAPER BLADE, 12/SET |
| 104900 | 12 V-GROOVE Blade |
| 104902 | 19.5" DOUBLE TAPER BLADE,12/SET |
| 104903 | 24" DOUBLE TAPER BLADE,12/SET |
| 104905 | 26.5" DOUBLE TAPER BLADE, 12/SET |
| 105396 | LINER, 19 1/4" long |
| 106316 | Elevator Belt Assembly |
| 106779 | 12.5" DOUBLE TAPER BLADE, 12/SET |
| 109705 | TUNE UP KIT DT - 15" 12 BLADE 37DEG |
| 109706 | TUNE UP KIT DT - 15" 12 BLADE 49DEG |
| 109707 | TUNE UP KIT DT - 15" 12 BLADE 70DEG |
| 109776 | TUNE UP KIT DT - 13.5" 12 BLADE 37DEG |
| 109777 | TUNE UP KIT DT - 13.5" 12 BLADE 49DEG |
| 109778 | TUNE UP KIT DT - 13.5" 12 BLADE 70DEG |
| 109779 | Tune up Kit DT - 17" 12 V-GROOVE 37 DEG |
| 109780 | TUNE UP KIT 17" 12 V-GROOVE 12 BLADE 49 DEG |
| 109781 | Tune up Kit 17" 12 V-GROOVE 12 BLADE 70 DEG |
| 109782 | TUNE-UP-KIT/19-1/2" 12-BLADE 37-DEG |
| 109783 | TUNE-UP-KIT/19-1/2" 12-BLADE 49-DEG |
| 109784 | TUNE-UP-KIT/19-1/2" 12-BLADE 70-DEG |
| 109785 | TUNE UP KIT DT - 24" V-GROOVE 12 BLADE 37DEG |
| 109786 | TUNE UP KIT DT - 24" V-GROOVE 12 BLADE 49DEG |
| 109787 | TUNE UP KIT DT- 24" V-GROOVE 12 BLADE 70DEG |
| 109788 | TUNE UP KIT DT - 26.5" V-GROOVE 12 BLADE 37DEG |
| 109789 | TUNE UP KIT DT - 26.5" V-GROOVE 12 BLADE 49DEG |
| 109790 | TUNE UP KIT DT - 26.5" V-GROOVE 12 BLADE 70DEG |
| 110409 | TUNE UP KIT - 15.00" WHEEL |
| C111266 | BCP Washer |
| 111625 | TUNE UP KIT DT - 12.5" 12 BLADE 49DEG |
| 111651 | TUNE UP KIT DT - 12.5" 12 BLADE 37DEG |
| 111652 | TUNE UP KIT 15" 12 |
| 111653 | TUNE UP KIT DT - 12.5" 12 BLADE 70DEG |
| 113181 | WHEEL BARE 8 BLADED TAPER |
| 113314 | 12.5" DOUBLE TAPER BLADE, 8/SET |
| 113315 | 13.5" DOUBLE TAPER BLADE, 8/SET |
| 113316 | 15" DOUBLE TAPER BLADE, 8/SET |
| 113317 | BLADE/SET/17T *8 BLADES* |
| 113320 | 26.5" double taper blade 8 set 25EZ same as 113321 |
| 113321 | 26.5" DOUBLE TAPER BLADE, 8/SET |
| 113416 | TUNE UP KIT - 15.00" WHEEL 12blade standard |
| 115468 | TUNE UP KIT DT - 15" TAPER DOVE TAIL, 8/SET 49DEG |
| 115955 | TUNE UP KIT 37 deg |
| 115956 | TUNE UP KIT 49 deg |
| 115957 | TUNE UP KIT 70 deg |
| 115958 | 13 1/2" BLADE (8/SET) |
| 116254 | TUNE UP KIT - 12.50" WHEEL |
| 118451 | TUNE UP KIT DT - 15" TAPER DOVE TAIL, 8/SET 37DEG |
| 118755 | TUNE UP KIT DT - 15" 12 BLADE 49DEG |
| 118823 | TUNE UP KIT DT - 15" 12 BLADE 49DEG |
| 123868 | TUNE UP KIT - 15.00" WHEEL |
| 126618 | UPPER END LINER |
| 13068 | BLADE, 15" (8/SET) |
| 131270 | HOUSING |
| 132644 | Elevator Belt Assembly |
| 134847 | TUNE UP KIT DT - 15" 12 BLADE 70DEG |
| 134973 | TUNE UP KIT DT - 15" 12 BLADE 37DEG |
| 139800 | TUNE UP KIT - 15.00" WHEEL |
| 155316 | TUNE-UP-KIT/17" 8-BLADE 49-DEG |
| 155816 | TUNE UP KIT DT - 13.5" 8 BLADE 49DEG |
| 15634 | TOP LINER 15" - ¾" THK |
| 15635 | UPPER END - ¾" THK |
| 15636 | LOWER END - ¾" THK |
| 15637 | Half Ring Liner (sold by the each) |
| 15683 | SEAL RETAINER (2 Required per Assembly) price per each |
| 15684 | CONTROL CAGE ADAPTER |
| 15728 | TAPER LOCK BUSHING |
| 15728-Dodge brand | TAPER LOCK BUSHING |
| 162854 | TUNE UP KIT DT - 26.5" TAPER DOVE TAIL 8 BLADE 49DEG |
| 171367 | TUNE UP KIT DT - 26.5" TAPER DOVE TAIL 8 BLADE 37DEG |
| 176246 | TUNE UP KIT DT - 13.5" TAPER DOVE TAIL 8 BLADE 37DEG |
| 176341 | TUNE UP KIT DT - 12.5" TAPER DOVE TAIL 8 BLADE 37DEG |
| 176931 | TUNE UP KIT - 15.00" WHEEL |
| 178831 | TUNE UP KIT - 12.50" WHEEL |
| 179273 | TUNE UP KIT - 15.00" WHEEL |
| 187617 | Tune UP Kit - 26.5" 70 deg |
| 18734 | Blade, 24.00" 8 p/set |
| 18742 | IMPELLER BOLT (use 158063) fastenal P/N 1123562 |
| 18768 | 12½" BLADE (8/SET) |
| 18882 | TOP LINER 26½" - ¾" THK |
| 19216 | FELT SEAL |
| 20349 | FEED SPOUT - RLM WHL - 90 DEG (use 414396) |
| 20351 | IMPELLER BOLT (use 158063) |
| 20352 | IMPELLER LOCK WASHER ( use 165790) |
| 20353 | IMPELLER (use 414370) |
| 20354 | SEAL RING (use 448251) |
| 20355 | CONTROL CAGE (use 414371) |
| 20356 | CONTROL CAGE, 49 degrees, RLM (use 441985) |
| 20357 | CAP NUT, Hardened, Round Top 1/2-13x7/8"Long (use 79950) |
| 20375 | Clamping Lug, Control Cage, use 54520 |
| 21573 | FEED SPOUT - STRAIGHT use 423249 |
| 24018 | BARE WHEEL (8 BLADE) |
| 2712 | 12 X 12 CABINET LINER use 223306 |
| 2765 | 1/2" CAST NUT FLANGED Use 220040 |
| 2766 | 6X12 LINER use 6x12liner |
| 30084 | 26½" BLADE (8/SET) |
| 30906 | Filter Cartridge 12.75 X 36.00 |
| 31206 | MID END LINER - ¾" THK |
| 37153 | 17" BLADE (8 / SET) |
| 49475 | CENTERING PLATE |
| 49477 | IMPELLER (8 WINDOW) |
| 49607 | BARE WHEEL (12 BLADE) |
| 52127 | CONTROL CAGE (37°) 102028 |
| 52128 | CONTROL CAGE (49°) |
| 52129 | CONTROL CAGE (70°) |
| 1529A | Control Cage Spec 49 Deg |
| 54378 | Tune Up Kit (Same as 60019S) |
| 54379 | Tune up Kit 15" 70 degree (Same as 60020S) |
| 54520 | CONTROL CAGE CLAMPING LUG |
| 57531 | IMPELLER (12 WINDOW) |
| 59036 | TOP LINER 15" - 1" THK |
| 59039 | TOP LINER 26½" - 1" THK |
| 59566 | BLADES, 12/ SET |
| 60015 | TUNE UP KIT 12-1/2 WHL 8 BLADE |
| 60016 | TUNE UP KIT 12-1/2 WHL 8 BLADE |
| 60017 | TUNE UP KIT 12-1/2 WHL 8 BLADE |
| 60018 | TUNE UP KIT 15" WHL 8 BLADE |
| 60019 | TUNE UP KIT 15" WHL 8 BLADE |
| 60019S | TUNE UP KIT SPECIAL |
| 60020 | TUNE UP KIT 15" WHL 8 BLADE |
| 60020S | TUNE UP KIT SPECIAL |
| 60021 | TUNE UP KIT |
| 60022 | TUNE UP KIT |
| 60023 | TUNE UP KIT |
| 60024 | TUNE UP KIT, 24" WHL, 8 BLADE |
| 60025 | TUNE UP KIT, 24" WHL, 8 BLADE |
| 60026 | TUNE UP KIT, 24" WHL, 8 BLADE |
| 60027 | TUNE UP KIT 26-1/2" WHL 8 BLADE 37 deg |
| 60028 | TUNE UP KIT 26-1/2" WHL 8 BLADE 49 deg |
| 60029 | TUNE UP KIT 26-1/2" WHL 8 BLADE 70 deg |
| 60030 | TUNE UP KIT 12-1/2" WHL 12 BLADE 37 deg |
| 60031 | TUNE UP KIT 12-1/2" WHL 12 BLADE 49 deg |
| 60032 | TUNE UP KIT 12-1/2" WHL 12 BLADE 70 deg |
| 60033 | TUNE UP KIT 15" WHL12 BLADE |
| 60034 | TUNE UP KIT 15" WHL12 BLADE |
| 60035 | TUNE UP KIT 15" WHL12 BLADE |
| 60036 | TUNE UP KIT 17 1/2" WHL 12 blade 37 deg |
| 60037 | TUNE UP KIT 17 1/2 " WHL 12 blade 49 deg |
| 60038 | TUNE UP KIT 17 1/2" WHL 12 blade 70 Deg |
| 60039 | TUNE UP KIT, 24" WHL, 12 BLADE 37 deg |
| 60040 | TUNE UP KIT, 24" WHL, 12 BLADE 49 deg |
| 60041 | TUNE UP KIT, 24" WHL, 12 BLADE 70 deg |
| 60042 | TUNE UP KIT 26-1/2" WHL12 BLADE 37 deg |
| 60043 | TUNE UP KIT 26-1/2" WHL 12 BLADE 49 deg |
| 60044 | TUNE UP KIT 26-1/2" WHL 12 BLADE 70 deg |
| 60045 | 12½" BLADE (12/SET) |
| 60046 | 15" BLADE (12/SET) |
| 60048 | Blade, 24.00" 12 p/set |
| 60049 | 26½" BLADE (12/SET) |
| 60756 | UPPER END LINER - 1" THK |
| 60757 | MID END LINER - 1" THK |
| 60758 | LOWER END 1" THK |
| 62024 | Belt, Rubber Mill |
| 62507 | LOWER END 1" THK |
| 62507EXT | End Liner, Lower, Extended |
| 724473 | TUNE UP KIT DT - 13.5" 12 BLADE 49DEG |
| 725457 | TUNE UP KIT BCP #15 37 DEG |
| 728355 | TUNE UP KIT DT - 13.5" 8 BLADE 70DEG TruBlast (also c185366) |
| 735024 | TUNE UP KIT DT - 13.5" 8 BLADE 49DEG TruBlast |
| 75137 | BUCKET 10x |
| 77379 | WHEEL HOUSING |
| 84431 | 17" BLADE (12 / SET) |
| 87327 | Liner, End (17" o/a, 16-3/8" face) |
| 87402 | TOP LINER- 11 3/4” x 5 1/8” x 1”. |
| 89590 | 13.5" DOUBLE TAPER BLADE, 12/SET |
| 89798 | 13½" BLADE (12/SET) |
| 96687 | TUNE UP KIT 13-1/2" WHL 12 BLADE |
| 96688 | TUNE UP KIT 13-1/2" WHL 12 BLADE |
| 96689 | TUNE UP KIT 13-1/2" WHL 12 BLADE |
| C100303 | Lance Liner |
| C102CCA | Control Cage Adaptor Universal ( 102130 102128 102029) |
| C1052 | CHAIN LINER |
Disa Goff Blastec - Parts list
| P/N | DESCRIPTION |
|---|---|
| 268 | CAGE RETAINER /INNER 12 |
| 291 | HUB/12 7 STATION (uses 6001204 T/L ADAPT.) |
| 293 | SEAL, FELT 3/4" X 3/4" X 18" LONG |
| 102045 | HOUSING/BLAST WHEEL 12 |
| 104111 | BLADE/SET OF 8 |
| 104112 | BLADE/SET OF 4 |
| 104132 | Impeller |
| 104136 | Control cage |
| 144500-B | Tune up Kit 9/10" Wheel (Also p/n200186) |
| 144500-C | Tune up kit 9/10" wheel |
| 144502-D | TUNE UP KIT 12” Whl 7 pos |
| 144503-D | Tune up kit 13.5" wheel 7 pos |
| 144504-D | Tune up kit 15" wheel 7 pos |
| 5000109 | Top Liner 9" wheel |
| 5000110 | Liner, End 9" wheel |
| 5000111 | Liner - Side 9/10 WH |
| 5000122 | Liner - End/Long 9/10 |
| 5000129 | LINER, End EXTENSION |
| 5000136 | IMPELLER, 7 Blade |
| 5000137 | CENTER PLATE |
| 5000138 | CONTROL CAGE 40 deg |
| 5000145A | CONTROL CAGE 40 dege 9/10 wheel |
| 5000147 | CENTERING PLATE |
| 5000158A | IMPELLER 9/10 |
| 5000294 | Shear Ring |
| 5000302 | Feed SPOUT SEAL |
| 5000303 | FEED SPOUT, 90 deg 12" wheel |
| 5000860 | Cast Nut 1/2-13 Flanged (220040) |
| 5001239 | 3 BB MILL BELT 5/16" holes |
| 5001936 | LINER, TOP 12" |
| 5001936-002R | Liner Top Right |
| 5001937 | END LINER |
| 5001938 | LINER, REAR SIDE |
| 5001939 | LINER, FRONT SIDE |
| 5002000 | Mill Belt 12BB GN 5/16" holes |
| 5002001 | Mill Belt Support 12BB |
| 5002006 | Rubber Mill Belt, 3BB 1/4" drain holes standard spacing, |
| 5002103 | IMPELLER, 8 Blade |
| 5002308 | LINER, END LONG |
| 5003265 | OUTER Liner 12BB BARREL SEGMENTS |
| 5004420 | BARREL SEGMENT, Outer 6BB |
| 5004421 | CENTER, HEAD BARREL LINER BB |
| 5004422 | Outer Liner Segment 3BB |
| 5100104-4R | Blade Blocks CW 9/10 |
| 5100106-4 | Blade 9/10 wheel - 4/set w/springs |
| 5100116 | BLOCK/CW SET 7 (116) |
| 5100117-7L | BLOCKS/BLADE 12" WHEEL 7 BLADED CCW |
| 5100129 | Liner, Ext 12" blast wheel Goff |
| 5100292 | SEAL, HUB 12" / CAST 2 PC |
| 5100301 | ADAPTER/CAGE 12" WHEEL |
| 5100651 | Spring, Blade, 12" wheel, price per each |
| 5101261-4L | BLOCK/CCW SET 9/10 |
| 5101366-7 | BLADE 7/SET w/SPRINGS |
| 5101540-8 | BLADE 8/SET w/SPRINGS (7set= 5102064-7) |
| 5101541-8 | BLADE 8/SET w/SPRINGS |
| 5101542-8 | BLADE 8/SET w/SPRINGS |
| 5101543-8L | BLADE BLOCK SET, CW, set of 8 |
| 5101544-8L | BLADE BLOCK SET, CCW, set of 8 |
| 5102063-7 | BLADE 7/SET w/SPRINGS |
| 5102064-7 | BLADE 7/SET w/SPRINGS (8 set= 5101540-8) |
| 595-016-040i | Impeller |
| 595-016-042 | BLADE |
| 595-016-054i | Control Cage |
| 595-016-056 | BLADE |
| 595-016-062 | Blade set of 8 |
| 595-016-074 | BLADE set of 8 |
| 595-016-075 | BLADE set of 8 |
| 595-016-5621 | WHEEL |
| 595-016-853 | LINER, TOP CURVED |
| 595-016-855 | LINER, END |
| 595-111-124-5 | CHAIN LINK RH G.F./Disa/Goff |
| 595-111-125-5 | CHAIN LINK LH G.F./Disa/Goff |
| 595-251-0671 | FUNNEL, EXIT |
| 6001204 | Bushing Adapter (use 61204) |
| 6000857 | Taper Lock Bushing |
| 6000956 | Taper Lock Bushing SAME AS 428843 |
| 6000962 | LOCK WASHER |
| 6100555 | Urethane belt 5/8 x 114" Lg |
| 7003910 | 1/2- 13Ncx1 Socket Head Screw |
| 7003920 | 1/2-13Ncx2 Socket head screw |
| 7004114 | BOLT/IMPELLER SHCS 5/8-11 x 1-1/2 Lg |
| 7008900 | BOLT/PLOW 2" USED ON GOFF BARREL HEAD |
| C0002428 | Bare Wheel 12" 7/blade |
| C0044559 | Wheel, Bare 12" 8/Blade |
| C0044560 | Hub 12 8 station |
| C0009383 | Wheel - Hub 9/10 |
| C0103572 | Lid - BW Housing 9/10 |
| C0103624 | Housing - Blast Wheel 9/10 |
| 5102624 | Cage - Adapter - Outer 9/10 |
| 5103576 | Seal - Rear Hub 9/10 |
| C6000468 | Bushing T/L 1615 x 1-1/8 Bore |
| C6101046 | Roll Pin 1/4 x 7/8 |
| 5100651-8 | Spring, Blade, 12" wheel, Comes in packs of 8 |
| BT-159 | cast nut 1/2" (use 220040) |
| LINR-0002 | 12 x 12 cabinet liner w/hole |
| LINR-0003 | 6 x 12 cabinet lier w/hole |
| LINR-0004 | 3 x 12 cabinet liner w/hole |
| LINR-0005 | 4 x 12 cabinet liner w/hole |
| LINR-0006 | Liner Plate 10 x 15 w/shiplap |
| LINR-0010 | 2 x 12 cabinet liner w/hole |
BCT - Parts list
| P/N | DESCRIPTION |
|---|---|
| B12823 | End Liner, M2 Wheel (M-2336) 23" |
| B12824 | Top Liner, M2 Wheel (M-2335) |
| B12809 | impeller bolt (158063) |
| MH-1515 | hi-collar lockwasher 3/4" (165790) |
| B12744 | Feed Spout Seal Ring |
| M-2093 | 16" Blade set/8 - M3 wheel |
| E3KIT16/49 | E Wheel TUK 49DEG (M3 orig wheel) |
| E3KIT16/70 | E Wheel TUK 70DEG (M3 orig Wheel) |
| M-731245 | Control cage, 49 deg (M3 orig wheel) |
| E2Kit15/49 | E Wheel TUK 49DEG M2 Wheel |
| B12808 | Impeller 2.5, 8 blades - M2 wheel |
| B12749 | M2 Wheel 49 deg control cage |
| M-2092 | 15" Blade set/8 - M2 wheel |
| M-2039 | Impeller (414370) |
| M-3661 | Control Cage 70 Deg (414371) |
| M-731431 | 35EZ160 Tune Up Kit 30 deg cage (use 731274, 737521) |
| M-731470 | 35EZ160 Tune Up Kit 30 deg cage (use 731274, 737521) |
| M-731510 | 35EZ160 Tune Up Kit 30 deg cage (use 731274, 737521) |
| M-731547 | 35EZ160 Tune Up Kit 30 deg cage (use 731274, 737521) |
| M-731432 | 35EZ160 Tune Up kit 49 deg cage (use 730289, 737522) |
| M-731471 | 35EZ160 Tune Up kit 49 deg cage (use 730289, 737522) |
| M-731511 | 35EZ160 Tune Up kit 49 deg cage (use 730289, 737522) |
| M-731548 | 35EZ160 Tune Up kit 49 deg cage (use 730289, 737522) |
| M-731433 | 35EZ160 Tune Up kit 70 deg cage (use 730290, 737523) |
| M-731472 | 35EZ160 Tune Up kit 70 deg cage (use 730290, 737523) |
| M-731512 | 35EZ160 Tune Up kit 70 deg cage (use 730290, 737523) |
| M-731549 | 35EZ160 Tune Up kit 70 deg cage (use 730290, 737523) |
| M-731434 | 35EZ160 tune Up kit 100 deg cage (use 730291, 737524) |
| M-731473 | 35EZ160 tune Up kit 100 deg cage (use 730291, 737524) |
| M-731513 | 35EZ160 tune Up kit 100 deg cage (use 730291, 737524) |
| M-731550 | 35EZ160 tune Up kit 100 deg cage (use 730291, 737524) |
Air Blast
Kotlyn Inc. supplies Airblast parts and accessories for all Airblast product lines. By providing you with a single supply source for your airblast parts, we simplify the repair and maintenance of your airblast machinery.
Typical airblast wear parts and components that we supply include:
- Blast Pots
- Nozzles
- Air Jets
- Hoses
- Gloves
- etc...
Cartridges
THE Most Advanced Nanofiber Filtration Technology media and pleated cartridge elements for use in most major brandsof cartridge style dust collectors. NANOfiber has the finest fibers and highest MERV rating in the industry. Nanofiber Technology will increase efficiency, reduce emissions and lengthen filter service life in your cartridge style dust collector.
- The industries smallest available fibers provide the best available filtration efficiency on sub micron particulate – MERV 15
- Nanofibers allow for surface loading filtration = EASY PULSE CLEANING
- Lower initial & operating pressure drop
- Unmatched release properties will offer reduced cleaning cycles
- Saves compressed air and energy cost
- Reduced outlet emissions = Cleaner Air
- Less pulsing and stress = Longer Filter Life
- Reduced downtime
- Fewer filter changes = Lower Disposal Costs
Nanofiber Technology available for cartridge collectors:
AAF® Airflow® Systems Donaldson Torit® Farr APC Flex-Kleen ITW/Gema MAC Micro Air Pneumafil Uni-Wash/Polaris Robovent® Sly Steelcraft Trion Wheelabrator
Nanofiber Technology Outperforms
Standard Cartridges
Ductwork
ALL COMPONENTS – Virtually any conceivable sheet metal component is made with the rolled lip system.
ALL SIZES – 3”- 20” and 24” INCLUDING odd sizes 11”-13”-15”-17”-19”
UNLIMITED ADJUSTMENT – Adjustable sleeves and fittings allow the installer to adjust lengths and parts to provide the ultimate flexibility.
THE ‘FOREVER’ CLAMP – The strongest, most secure, and continuously reusable clamp on the market. In fact, if you are ever unable to re-use the clamp, Kotlyn, Inc. will replace it, FREE. Call for details.
HEAVY DUTY FITTINGS – Branches, hoods and transitions are all heavy gauge.
Filter Bags & Cages
Filter Bags
Kotlyn Inc. can supply fabric filter bags for your dust collection system in a wide variety of fabrics, finishes, styles and sizes. Because of the variety of particulates collected and individual operational conditions of collection systems, selection of replacement filters should be determined through careful analysis of your current operating parameters.
Filter Cages
We can supply quality support cages for use in most baghouses. Properly designed cages serve as critical baghouse components for optimum bag performance and durability.
We offer specialty cage designs for specific applications.
Pleated Filter Elements
A combination of pleated high-efficiency filtration media and an inner support core that forms a one-piece element that fits directly into your existing baghouse tubesheet. Replaces traditional filter bags and cages.
Pleated Filter Advantages
- Requires less compressed air pressure to pulse clean
- Operates across a wide range of temperatures and applications Increases filtration area 2-3 times
- Dramatically reduces air-to-cloth ratios
- Reduces operating pressure differential
- Reduces collection operational energy costs
- Direct replacement for bags and cages
- Substantially reduces installation time
- Shorter length keeps the elements out of the inlet gas stream, reducing abrasion
- Significantly more efficient than standard felt media
